Skoda Rapid NH 2014 Workshop Manual page 268

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
– Remove screws -2- (4,5 Nm).
– Turn the nut -4 - by 90° at the bottom side using the open-end
spanner SW 10 and unlock the catch peg.
– On vehicles with window cranks, remove the window crank.
Slide the spacer ring -1- in -direction of arrow- and detach the
window crank from the drive.
Caution
When releasing the door trim panel, there is the risk that dam‐
age may occur on the fixing elements! To prevent this, the
specified location and order of the clip connections to be loos‐
ened must absolutely be kept when removing the door trim
panel!
– Loosen the door trim panel in the -specified order - out of the
clip connections. To do this, e.g. use the wide plastic wedge -
T10383 / 1, T10383- .
260
Rep. gr.70 - Trim, insulation