Skoda Rapid NH 2014 Workshop Manual page 127

2.16.2 Installing
– The openings -4- under the window run must be masked with
fabric adhesive tape.
Dimensions of adhesive: height = approx. 10 mm, width = approx.
40 mm. 2 pieces.
– Slide the window run -1- into the supports -arrows a-.
– Press the window run -1- evenly all around against the door
flange -2-.
– Press the sealing lip of the door run from the inside against the
door flange.
– Slide in the retaining clip -3- -arrow b-.
Note
The chamfer of the retaining clips must point to the inside of the vehicle.
♦
If the chamfer points to the outside of the vehicle, the -crossed-out red colour-, then the retaining clip must
♦
be turned around.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
119
2. Door internal parts