Skoda Rapid NH 2014 Workshop Manual page 144

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2.1.2 Remove the rear bumper
– Remove tail lights ⇒ Electrical System; Rep. gr. 94 .
– Remove the screws -4- in the area of the left and right wheel‐
house.
– Remove the screws -5- from below.
– Unclip the rear bumper - 1 - out of the catches of the lateral
guides (Pos.3) - arrow b -.
– Carry out further installation only with the assistance of a sec‐
ond mechanic.
– Slacken the catches -arrows a- at the top guides -2-.
– Detach the rear bumper -1- parallel from the vehicle
-arrows c-.
– Disconnect the plug connections of the existing electrical com‐
ponents.
2.1.3 Installing the rear bumper
– Attach the existing plug connections.
136
Rep. gr.63 - Bumpers