Removing And Installing The Manual Drive - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2.13

Removing and installing the manual drive

Removing
– Remove window crank
⇒ "2.14 Removing and installing window crank", page 115
– Removing door trim panel
⇒ "2.2 Removing and installing the rear door trim panel ", page
259 .
– Secure the door window with adhesive tape so that it does not
slide off.
– Unscrew screws -2-.
– Remove the manual drive - 1 - from the supports of the hoisting
drum - 3 -.
Installing
– Fit the manual drive - 1 - on the supports of the hoisting drum
- 3 -. Raise the door window slightly and then lower it so that
the serration can slide in better between the manual drive and
the hoisting drum.
– Install screws -2- (3 Nm).
114
Rep. gr.58 - Rear doors, door components
.