Removing And Installing The Rear Door Trim Panel - Skoda Rapid NH 2014 Workshop Manual

– Push the Bowden cable -3- on the inside of the door trim panel
out of the inner door control -2- in -direction of arrow- and un‐
clip the end piece -1-.
– Disconnect the electrical plug connections from the door trim
panel depending on the vehicle equipment.
Installing
– The installation occurs in reverse order.
Note
Before the installation, check all the fixing elements for damage,
if necessary replace.
2.2 Removing and installing the rear door
trim panel
Removing
– Switch off the ignition and all electrical components.
– Carefully clip the trim -3- out of the door trim panel e.g. using
the disassembly wedge - T10383, 3409- .
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2. Door and side trim panels
259