Skoda Rapid NH 2014 Workshop Manual page 295

Caution
If the seat is lifted out of the vehicle or transported, it must not
be touched at the component parts. These include the belt
buckle, the lever for the longitudinal seat adjustment, the seat
height adjustment lever and the seat trim panels. This is nec‐
essary to avoid damage.
Installing
– Insert the seat into the corresponding hole in the floor via a
centering pin - 5 - on the tunnel side.
– Put the seat into the rearmost position by means of the longi‐
tudinal adjustment.
– Tighten the front screw -4- on the tunnel side (40 Nm).
– Tighten the front screw -2- on the rail side (40 Nm).
– Put the seat into the foremost position by means of the longi‐
tudinal adjustment.
– Tighten the rear screw -3- on the tunnel side (40 Nm).
– Tighten the rear screw -1- on the rail side (40 Nm).
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
287
1. Front seats