Skoda Rapid NH 2014 Workshop Manual page 185

Removing
– The spoiler cannot be removed without being destroyed.
Install the rear spoiler
– Apply glass/paint primer - D 822 150 A1 - to adhesive area on
the plastic part -1 and 2-.
– After drying, apply glass/paint primer - D 009 200 02 - to the
adhesive area on plastic part -1 and 2-.
– Apply adhesive cement -5- - D 172 090 A2.
– Press on the spoiler at a specific point.
– Screw in screw - 4 - (1.5 Nm).
– Secure spoiler against moving and ungluing e.g. with adhesive
tape.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
177
3. Strips and trims