Skoda Rapid NH 2014 Workshop Manual page 74

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
Note
If it is necessary for the following operations, it is possible to slacken the Bowden cable.
Slacken Bowden cable to bearing bracket
– Twist the Bowden cable -5- by 45° and remove it from the
bracket -arrow a-.
– Turn the Bowden cable - arrow b -until it can be guided out of
the lug in the door lock (Pos. 1) - arrow c -.
Slacken the Bowden cable to the inner door control:
– Twist the Bowden cable -6- by 45° and remove it from the
bracket.
– Turn the Bowden cable -arrow d- until it can be guided out of
the lug in the door lock (Pos.1) -arrow e-.
2.8.2 Installing
Installing
– The installation occurs in reverse order.
66
Rep. gr.57 - Front doors, door components, central locking