Skoda Rapid NH 2014 Workshop Manual page 281

Removing
– Removing the rear seat bench
⇒ "3 Removing and installing backrests", page 298
– Remove top trim panel of pillar C
⇒ "3.6 Removing and installing trim panel of pillar C",
page 269 .
– While doing so, loosen the retaining clips -2- out of the sup‐
ports of the body.
– Take the wheel house trim panel -1- out of the vehicle.
Installing
– The installation occurs in reverse order.
Note
Before installation, check all the fixing elements for damage, replace if necessary.
♦
Ensure that the wheel house trim panel is placed in the double-braided strip of the door seal after the
♦
installation.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
273
3. Trim panels of pillars