Removing And Installing Front Passenger Airbag Key Switch - Skoda Rapid NH 2014 Workshop Manual

– Unplug connector -3-.
– Remove the screw - 1 - (9 Nm) and remove the sensor - 2 -.
Installing
– The installation occurs in reverse order.
WARNING
Pay attention to the sequence when connecting the battery ⇒
Electrical System; Rep. gr. 27 .
3.11 Removing and installing front passenger
airbag key switch
WARNING
Observe the general safety instructions for working on airbag,
belt tensioner and battery separation units (pyrotechnical com‐
ponents)
⇒ "3.3 Observe the general safety instructions for working on
airbag, belt tensioner and battery separation units (pyrotech‐
nical components)", page 225
The switching off and on is undertaken only when the ignition
is switched off.
Removing
– Disconnect battery earth strap ⇒ Electrical System; Rep. gr.
27 .
– Remove the glove compartment on front passenger's side
⇒ "1.2 Removing and installing the glove compartment", page
249 .
– Disconnect the plug connection of the front passenger airbag
key switch.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
.
Body Work - Edition 10.2018
3. Airbag
231