Removing And Installing Backrests - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
3

Removing and installing backrests

Removing
– Remove deflection fitting below for the middle safety belt
⇒ "1.8 Removing and installing the rear double belt buckle",
page 219 .
– Unlock both backrest parts and fold over.
– Remove cap for clamp.
– Release the screw -1- (9 Nm) and remove the clamp -3- from
the support -2-.
– Unhook backrest from the middle positions -arrow A-.
– Push the seat backrest out of the bolts -arrow B-.
– Disconnect the plug connections for heating prior to removing
the backrest (depending on the vehicle equipment).
Installing
– The installation occurs in reverse order.
298
Rep. gr.72 - Seat frames