Skoda Rapid NH 2014 Workshop Manual page 67

2.5.2 Installing
– Remove door handle -2- -arrow a-.
– Fit the lock cylinder housing -1- at a right angle -arrow b- into
the bearing bracket -3-.
– Screw the screws -5 and 7- into the bearing bracket.
– Tightening torque of screws -5 and 7- (3.5 Nm).
Note
During the assembly the lock cylinder housing must be pressed against the outer door panel.
– Further installation occurs in reverse order.
• Then it is absolutely necessary to perform a functional check
when the door is opened.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
59
2. Door internal parts