Removing And Installing The Locking Clamp; Door Handle And Door Lock - Summary Of Components - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2.4 Removing and installing the locking
clamp
Removing
– Release screws - 2 - and remove locking clamp - 1 -.
Installing
– Fit the locking clamp - 1 - at the D pillar and position the screws
- 2 -. Tightening torque - 25 Nm.
– Adjusting the locking clamp
⇒ "1.3.1 Adjusting the locking clamp", page 92
2.5

Door handle and door lock - Summary of components

1 - Door lock
❑ Removing and installing
⇒ "2.8 Removing and in‐
stalling the door lock",
page 104 .
2 - Control cable
❑ From inner door control
to lock release.
3 - Control cable
❑ From door lock to bear‐
ing bracket.
4 - Clamp
❑ Removing and installing
⇒ "2.4 Removing and in‐
stalling the locking
clamp", page 98
5 - Screw
❑ Tightening torque - 1.7
Nm.
❑ The bearing bracket is
released from the door
by loosening the screw.
6 - Door handle
❑ Removing and installing
⇒ "2.7 Removing and in‐
stalling the door han‐
dle", page 102 .
7 - Cap
❑ Removing and installing
⇒ "2.6 Removing and in‐
stalling the cap",
page 99 .
8 - Washer
9 - Cover
❑ Not installed in all the countries.
10 - Screw
❑ Tightening torque - 20 Nm.
98
Rep. gr.58 - Rear doors, door components
.
.