Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
Note
Before the installation, check all the fixing elements for damage,
if necessary replace.
– Ensure that the tailgate/luggage compartment cover is located
in the double-braided strip of the tailgate seal after the instal‐
lation.
5.2
Removing and installing top part of side luggage compartment trim panel
1 - Top part of side luggage
compartment trim panel.
Removing
–
Remove luggage com‐
partment cover.
–
Remove the rear deflec‐
tion fitting
⇒ "1.5 Removing and in‐
stalling the outer rear
seat belts", page 216
–
Remove top trim panel
of pillar C
⇒ "3.6 Removing and in‐
stalling trim panel of pil‐
lar C", page 269
–
Remove wheel house
trim panel
⇒ "3.8.2 Removing and
installing wheel house
trim panel", page 272
–
Remove luggage com‐
partment light - 4 - ⇒
Electrical System; Rep.
gr. 96 (left side only).
–
Unscrew screws -3-.
–
Unclip the trim panel out
of the supports of the
body.
–
Run the seat belt
through the trim panel.
Installing
–
The installation occurs in reverse order.
2 - Expanding nut
3 - Screw
❑ Tightening torque - 2.5 Nm.
4 - Luggage compartment light
278
Rep. gr.70 - Trim, insulation
.
.
.