Skoda Rapid NH 2014 Workshop Manual page 34

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
1.6.1 Removing
Note
The Bowden cable -2- is not separated from the front flap lock.
– Open front flap.
– Separate the Bowden cable -2- in the Bowden cable coupling
⇒ "1.7 Separating the Bowden cable", page 28
– Depending on the additional equipment, disconnect the plug
connection for the contact switch of the engine hood.
– Release the screws - 4 - (12 Nm) and remove the flap lock
- 1 - in - direction of arrow a - from the lock carrier.
Note
Depending on the additional equipment, remove and install the contact switch for the engine hood at the flap
lock ⇒ Electrical System; Rep. gr. 96 .
26
Rep. gr.55 - Bonnet, rear lid
.