Removing And Installing The Operating Lever Of The Seat Height Adjustment; Removing And Installing The Seat Trim Panel On The Tunnel Side - Skoda Rapid NH 2014 Workshop Manual

– Loosen the seat upholstery -2- from the seat rack -1- and re‐
move the seat upholstery.
Installing
– The installation occurs in reverse order.
Note
Before the installation, check all the fixing elements for damage,
if necessary replace.
1.4 Removing and installing the operating
lever of the seat height adjustment
Removing
– Remove front seat
⇒ "1.1 Removing and installing front seat", page 286
– Remove the seat trim panel on the rail side (seat with height
adjustment)
⇒ "1.3 Removing and installing the seat upholstery on the rail
side (seat with height adjustment)", page 289
– Release the screws -1- (4.5 Nm) and remove the operating
lever -2-.
Installing
– The installation occurs in reverse order.
1.5 Removing and installing the seat trim
panel on the tunnel side
Removing
– Remove front seat
⇒ "1.1 Removing and installing front seat", page 286
– Remove the front belt buckle
⇒ "1.3 Removing and installing the front seat belt buckle", page
214 .
– Remove screw -1- (1 Nm).
– Loosen the seat upholstery -2- from the supports in the seat
rack -3- and remove the seat upholstery.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
.
.
291
1. Front seats