Skoda Rapid NH 2014 Workshop Manual page 41

Adjusting the adjusting buffer
Note
Install the adjusting buffer - 2 and 3 - on the left and right up to the stop.
♦
Turn the adjusting buffers by 90° if required, in order to pretension the flap.
♦
– After the front flap has been adjusted, the locking clamp - 1 -
can once again be installed and adjusted
⇒ "1.10.2 Adjusting the locking clamp", page 34
– The front flap can be adjusted in the front area to the height of
the wings with the flap lock -5-
⇒ "1.10.1 Adjusting the flap lock", page 33
– After the flap has been adjusted, the locking clamp has been
installed and all the connections have been tightened, the ad‐
justing buffers can be turned if required.
– After carrying out adjustment work, perform corrosion protec‐
tion measures on the hinges -6- and the screws -7- .
1.10.1 Adjusting the flap lock
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
.
.
Body Work - Edition 10.2018
1. Front flap
33