Door Adjustment - Skoda Rapid NH 2014 Workshop Manual

1.3

Door adjustment

Note
The vehicle must be standing on its wheels in order to adjust the door.
♦
The door is correctly adjusted if in the closed state it has an overall even gap size, is not positioned too far
♦
outwards or inwards and the contours are aligned.
For checking the gap sizes: ⇒ Body Repairs; Rep. gr. 00 ; Technical data; body gaps; front body .
♦
After carrying out adjustment work, perform corrosion protection measures at the screws and hinges.
♦
Setting the gap sizes
In order to correctly set the gap sizes, the screws
-2, 5, 7, and 8- must be slackened at the A pillar.
– The bottom A pillar trim panel must be removed for slackening
the screw -5-
⇒ "3.2 Removing and installing bottom trim panel of pillar A on
the driver's side", page 264
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
.
Body Work - Edition 10.2018
1. Front door
49