Skoda Rapid NH 2014 Workshop Manual page 11

– Removing front bumper
– Pull off the control cable from the lock carrier
⇒ "1.7 Separating the Bowden cable", page 28
– Remove the screws -3- at the left and right frame side rails.
– Install the guide bars - T30092 (3411)- on the left and right
frame side rails.
– Remove top screws - 2 -.
– The lock carrier -1- can be pulled on the guide bars - T30092
(3411)- by approx. 10 cm forwards -arrows-.
⇒ "1.1.2 Removing", page 132
.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
3
1. Front body