Removing And Installing The Locking Clamp - Skoda Rapid NH 2014 Workshop Manual

Note
When installing the Bowden cable - 3 -, ensure that the grommet - 5 - is correctly secured.
♦
When attaching the Bowden cable - 3 -, pay attention to the mandatory clipping - 4 -.
♦
• Before closing the front flap, carry out a functional test of the
operating lever and the Bowden cable.
1.8

Removing and installing the locking clamp

Removing
– Unscrew screws -3-.
– Remove the locking clamp - 1 - from the front flap - 2 -.
Installing
– Tightening torque of screws -3- (10 Nm).
– Adjust the locking clamp to the flap lock
⇒ "1.10.2 Adjusting the locking clamp", page 34
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
29
1. Front flap