Skoda Rapid NH 2014 Workshop Manual page 101

Note
To adjust the locking clamp -2- once the screws -3- are loosened, increased force must be applied.
♦
When closing the door it must lock completely without using additional force and must have no play.
♦
When adjusting the locking clamp, the door must not be pressed upwards or downwards.
♦
The locking clamp is used for adjusting the following:
• If the rear door adjustment is not flush with the side part.
Carry out the following tasks
– Slacken the locking clamp -1- by loosening the screws -2- at
the C pillar.
– Adjust the door with the locking clamp -1- in such a way that
the rear door when in the closed state is flush with the side
part (wind noise).
– Tighten screws - 2 - of locking clamp - 1 -.
Tightening torque of screws (Pos. 2) - 20 Nm.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
93
1. Rear door