Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
Note
The screw -2- is microencapsulated and must be replaced
♦
each time it has been released.
Before installing the new screw, the thread of the correspond‐
♦
ing nut must be cleaned.
Installing
– The installation occurs in reverse order.
1.5
Removing and installing the outer rear
seat belts
Removing
– Remove the seat bench
⇒ "2.1 Removing and installing the rear seat bench",
page 295
.
– Remove the backrest depending on the vehicle equipment
⇒ "3 Removing and installing backrests", page 298
216
Rep. gr.69 - Passenger protection
.