Separating The Bowden Cable - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
1.7

Separating the Bowden cable

Removing
– Open front flap.
– Unclip the Bowden cable coupling - 2 -, located above the
headlight on the driver's side, out of the lock carrier
-arrow a-.
– Take the Bowden cables -1- and -3- out of the Bowden cable
coupling -2- in -arrows a-.
– Swivel the Bowden cable -1- about 90° in
-direction of arrow b- and take the Bowden cable
-in direction of arrow c- out of the support of the Bowden cable.
Installing
– The installation occurs in reverse order.
28
Rep. gr.55 - Bonnet, rear lid