Removing And Installing Bearing Bracket - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2.9

Removing and installing bearing bracket

2.9.1 Removing
– Remove rear door trim panel
⇒ "2.2 Removing and installing the rear door trim panel ", page
259 .
– Remove the cover
⇒ "2.2 Removing and installing the cover", page 95
– Remove the cap
⇒ "2.6 Removing and installing the cap", page 99
handle
⇒ "2.7 Removing and installing the door handle", page 102
– Release screw - 4 - and remove gasket - 3 -.
– Take the bearing bracket -1- out of the door -arrow a-.
Slacken Bowden cable
– Unlock the bracket -5- and swivel the bracket out of the support
in the bearing bracket -arrow b-.
– Lift the bolt of the control cable out of the support -arrow c-.
106
Rep. gr.58 - Rear doors, door components
.
and the door
.