Removing And Installing The Cross Member For The Dash Panel - Skoda Rapid NH 2014 Workshop Manual

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
Installing
– Slide decorative trim into the recesses in the dash panel.
– Press in the panel until the clips click into place.
– Install screws -1- (1.5 Nm).
– Install vents.
1.5 Removing and installing the cross mem‐
ber for the dash panel
Removing
– Removing dash panel
⇒ "1.1 Removing and installing the dash panel", page 244
– Removing the centre console
⇒ "2.2.2 Removing and installing centre console", page 203
– Remove screws -3- (9 Nm).
– Release screw -2- (20 Nm) and remove support -1-.
252
Rep. gr.70 - Trim, insulation
.
.