Skoda Rapid NH 2014 Workshop Manual page 13

– Bring to service position
– Separate electrical plug connections.
– Drain the coolant and separate the coolant line ⇒ Engine
cooling; Rep. gr. 19 .
– Separate the lines for the condenser ⇒ Heating and air con‐
ditioning system; Rep. gr. 87 .
– Remove the guide bars - T30092 (3411)- at the left and right
frame side rails - 2 - with the help of a second mechanic and
remove the lock carrier with component parts - 1 -.
WARNING
If the cables of the air-conditioning system and/or the coolant
are separated, the drive unit must no longer be started.
Note
The condenser and hydraulic oil cooler must not be tied up to the cables.
♦
The condenser and hydraulic lines must not be kinked.
♦
⇒ "1.3 Service position ", page 2
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
5
1. Front body