1.5
Lock and unlock components of front flap - Summary of components
1 - Locking clamp
❑ Removing
⇒ "1.8 Removing and in‐
stalling the locking
clamp", page 29
❑ Setting
⇒ "1.10.2 Adjusting the
locking clamp",
page 34
.
2 - Release handle
❑ Removing and installing
⇒ "1.9.2 Removing and
installing", page 31
3 - Bowden cable
❑ From the Bowden cable
coupling to the operat‐
ing lever
⇒ "1.9 Removing and in‐
stalling the operating
lever", page 30
.
4 - Retaining clip
5 - Bowden cable
6 - Bowden wire coupling
❑ The Bowden cable cou‐
pling is located above
the headlight on the
driver's side.
❑ Separate
⇒ "1.7 Separating the
Bowden cable",
page 28
.
7 - Bowden cable
❑ From the front flap lock
to the Bowden cable
coupling.
❑ Clipped into the Bowden cable coupling.
8 - Flap lock bonnet
❑ Remove and install front flap lock
❑ Setting
⇒ "1.10.1 Adjusting the flap lock", page 33
1.6
Removing and installing front flap lock
Note
Depending on the model version, slight differences must be taken
into consideration when removing and installing the front flap lock.
.
.
⇒ "1.6 Removing and installing front flap lock ", page 25
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
.
.
25
1. Front flap