Video Wall Setup; Tutorial - Creating A New Video Wall - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
8.19. Video Wall Setup
The UBEX devices can be arranged to a video wall in Matrix mode. This section is about the UBEX video wall,
including a step-by-step tutorial to create a new wall, and the handling of the system in the Lightware Device
Controller (LDC) software. #videowall #vw #layout #zone
8.19.1. Tutorial - Creating a New Video Wall
Navigate to the Video Wall Setup menu. The default state is the empty window (no video wall is defined).
Default state of the Video wall setup menu
Step 1. Click on the Create New Video Wall button. A wizard
pops up where you can add the size of the wall.
Click on the upper left corner of the wall at first,
then click on the lower right. A unique name can
be added in the Video wall name field, the default
for the first one is VIDEOWALL1. Click on the
Create button when ready.
A 3x3 wall is created in our example.

INFO: The UBEX video wall system supports the
display devices up to 8x4 (column x row).
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Step 2. The next step is adding the destination devices to the wall where the content will be displayed. The
available destination streams appear on the lower left side of the window. Click on a destination stream
to see its tags. You can search between the destination streams using the Search streams field. The
tags are also searchable. Clicking on the  icon launch the
Drag and drop the destination streams to assign them to the wall. If a stream has been assigned to the
wall, it will disappear from the list.
The video wall size can be changed by clicking on the Change video wall size button.

INFO: Only the HDMI out 1 port can take part in the video wall, the HDMI out 2 does not participate but can
transmit any other stream during the operation of the video wall.
TIPS AND TRICKS:

wall makes easier the configuration steps. See the details in the
section.
Step 3. Complete the video wall. Click in the  (Activate) icon next to of
the name of the video wall. When the icon changes to  and the
name changes to white, the video wall becomes active.
Identify Stream / Identify Display
Destination stream assignment
Adding unique names and tags to the destination streams before defining the video
Video Destination Port Properties Window
98 98
feature.