Port Information; Device Information - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the Search Field. #tag
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicator are also can be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪ Frame Detector - The tool displays the frame information of the original stream coming from the
connected source stream before a possible rescaling / frame rate conversion.
8.9.2. Port Information
The most important information and settings of the input port are available in the Port information section.
Settings
▪ HDCP mode (Auto / Always); #hdcp
▪ Power 5V mode (Auto / Always on / Always off);
Timing mode (Free run / Source locked);
▪
▪ Identify Stream / Identify Display.
Scaler / Frame Rate Converter Settings
▪
Scaling mode / Output resolution mode:
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
– EDID based: the scaler forces the resolution which is read out from the EDID of the connected sink
device.
▪ Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the
▪ EDID based resolution: the resolution which is read out from the EDID of the connected sink device.
▪ Image position (Stretch / Fit / Center);
INFO:
The image position setting (scaler) is available at the HDMI out 1 port only.
Color space conversion (No conversion / RGB / YUV 4:4:4 / YUV 4:2:2);
▪
▪ No Sync Screen (Test Pattern). #testpattern #nosyncscreen
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
#power5v
#timingmode #freerun #sourcelocked
#identifystream #identifydisplay
#scaler #frc
Resolutions of the Scaler / FRC
#csc #colorspace
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Status / Signal Info
All important information (e.g. hotplug detect, HDCP status, resolution, total size, pixel clock, color space,
e.g.) are available in the status and signal info sections.
Display Info
All related information about the sink device connected to the output port.
Tools
▪ Frame Detector
rescaling / frame rate conversion.
8.9.3. Device Information
The most important information and settings of the transmitter are available in the Device information section.
Settings
▪ Device label: the default label is the MAC address of the device but it can be changed to any unique
name. #label #devicelabel
MAC address;
▪
▪ Operation mode: showing the current operation mode, it can be transmitter, receiver or transceiver.
The operation mode can be changed in the
▪ Identify unit: Clicking on the button makes the four front panel LEDs blink in green for 10 seconds. The
feature helps to identify the device itself in the rack shelf or on the desk.
▪ Device properties: Clicking on the button opens the properties windows of the endpoint device. See the
details:
– For Receiver (RX) operation mode in the
– For Transceiver (TRX) operation mode in the
▪ Restart unit: clicking on the button makes rebooting the device (the same as disconnecting from the
power source and reconnecting again).
▪ Update firmware: clicking on the button makes launching the firmware update of the endpoint device by
the MMU. See more details about it in the
section.
- The tool displays the frame information of the transmitted stream after a possible
Device Map.
Receiver Mode section.
Transceiver Mode
#reboot #restart
Endpoint Upgrade - Centralized Firmware Upgrade
77 77
#identifyme
section.
section.