Endpoint Firmware Packages In The Mmu; Resolutions Of The Scaler / Frc - Lightware UBEX Series User Manual

 
     
14. Appendix 14. Appendix
Endpoint Firmware Package v1.4.0
▪ Some video process related settings (e.g. scaler, CSC, etc)
are not restored on the TX/TRX input ports after restarting the
device. Please update your device to v1.4.1
MMU Firmware Package v1.2.1
The firmware package of the UBEX-MMU-X200 Matrix Management
Unit contains a few known issues and limitations which are going to
be fixed in the next firmware release.
▪ Only basic bandwidth management is supported. (HDMI1
channel has high priority, if bandwidth limit is exceeded by HDMI1
and HDMI2 streams, HDMI2 is not transmitted or received.)
▪ LW2 simple protocol is not supported, it is recommended to use
LW3 protocol to control the MMU.
Video and Audio cross-point mute and lock functions are not
▪
available.
▪ Control USB is not supported, it is recommended to control the
MMU through the Control Ethernet Interface.
▪ Only one MMU per network is supported.
▪ In video wall setups, upscaling is not fully supported. (e.g.:
4K video content displayed on a 2-by-2 video wall where the
resolution of the displays is 4K).
In tile view handling of video walls is limited, it is recommended
▪
to use the grid view for video walls.
14.5.4. Endpoint Firmware Packages in the MMU
Based on the centralized firmware upgrade method the firmware package
of the Matrix Management Unit (MMU) contains the firmware
packages of the endpoint devices either. Thus, the firmware packages
are released in pairs which are developed and tested together. The
following table shows which version of endpoint firmware belongs the
firmware package of the MMU.
MMU firmware
Release date
package version
02-07-2019 v1.1.0
16-09-2019 v1.1.1
27-11-2019 v1.2.0
04-12-2019 v1.2.1
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
14.6. Resolutions of the Scaler / FRC
The following list contains the resolutions and refresh rates which
can be forced on the scaler and the frame rate converter for the sink
device.
640 x 480
720 x 480
720 x 576
800 x 600
848 x 480
1024 x 768
1280 x 720
1280 x 720
1280 x 768
1280 x 768
1280 x 768
1280 x 800
1280 x 1024
1280 x 1024
1280 x 1024
1360 x 768
1366 x 768
1400 x 1050
1400 x 1050
1400 x 1050
1440 x 900
1440 x 1080
Endpoint series firmware
1600 x 900
package version
1600 x 1200
v1.3.1
1600 x 1200
v1.3.2
1920 x 1080
v1.4.0
1920 x 1080
v1.4.1
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Resolution Comment
@ 60 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 60 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 75 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 75 Hz
@ 60 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 75 Hz
@ 60 Hz
@ 60 Hz
@ 60 Hz
@ 50 Hz
@ 60 Hz
@ 24 Hz
@ 25 Hz
Resolution Comment
1920 x 1080 @ 30 Hz
1920 x 1080 @ 50 Hz
1920 x 1080 @ 59 Hz
1920 x 1080 @ 60 Hz
1920 x 1200 @ 50 Hz
1920 x 1200 @ 60 Hz
2048 x 1080 @ 50 Hz
2048 x 1080 @ 60 Hz
2048 x 1200 @ 60 Hz
2560 x 1080 @ 60 Hz
2560 x 1440 @ 60 Hz
2560 x 1600 @ 60 Hz
2560 x 2048 @ 60 Hz
3440 x 1440 @ 24 Hz
3440 x 1440 @ 25 Hz
3440 x 1440 @ 30 Hz
3840 x 2160 @ 24 Hz
3840 x 2160 @ 25 Hz
3840 x 2160 @ 30 Hz
3840 x 2160 @ 60 Hz
3840 x 2160 @ 60 Hz with reduced blanking
3840 x 2400 @ 24 Hz
3840 x 2400 @ 30 Hz
4096 x 2160 @ 24 Hz
4096 x 2160 @ 25 Hz
4096 x 2160 @ 30 Hz
4096 x 2160 @ 50 Hz
4096 x 2160 @ 60 Hz
190 190