Transceiver Mode - Lightware UBEX Series User Manual

 
     
4. UBEX Concept 4. UBEX Concept
HDMI Input Modes
The HDMI input ports of the receiver cannot accept video signals due
to software limitation.
Summary Tables
HDMI INPUTS
HDMI input 1
Accepted signal

HDMI OUTPUTS
HDMI output 1
up to
Output signal
4K@60 4:4:4
Selected input port
Signal source
of the remote device
 
Scaler
Frame rate converter
 
(FRC)
Color space
 
converter (CSC)
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
4.3.3. Transceiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
HDMI input 2

HDMI output 2
up to
4K@60 4:4:4
Selected input port
of the remote device
-
  Video port diagram of the F100/F110/R100 transceiver
Fiber Optical Interface
 
The transceiver is able to send and receive HDMI video streams
together in the same time over the fiber optical links.
HDMI Input Modes
The transceiver can receive one HDMI video stream from the HDMI
in 2 input port. The signal can be up to 4K@60 Hz 4:4:4. The video
stream can be processed in the video processor (it contains frame
rate converter (FRC) and color space converter (CSC) functions). The video
processor settings are available in the LDC software (see the details
in the Video Source Port Properties Window
Panel section).
The HDMI in 1 input port cannot accept video signal.
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
or in the Source Stream
HDMI Output Modes
The transceiver can transmit HDMI video streams on two HDMI 2.0
output ports. The signal can be up to 4K@60 Hz 4:4:4 in the case of
both outputs.
The HDMI out 1 transmits the HDMI signal coming from the remote
UBEX endpoint. The video stream can be processed in the video
processor (it contains scaler, frame rate converter (FRC) and color space
converter (CSC) functions). The video processor settings are available
in the LDC software (see the details in the
Properties Window or in the HDMI Out 1 Panel
The HDMI out 2 transmits the HDMI signal coming from the HDMI in 1
input port so it operates as a local output port. The stream cannot be
affected by any video processing.
Summary Tables
HDMI INPUTS
HDMI input 1
Accepted signal

Scaler -
Frame rate converter
-
(FRC)
Color space
-
converter (CSC)
HDMI OUTPUTS
HDMI output 1
up to
Output signal
4K@60 4:4:4
Input port of the
Signal source
remote device
 
Scaler
Frame rate converter
 
(FRC)
Color space
 
converter (CSC)
45 45
Video Destination Port
section).
HDMI input 2
up to
4K@60 4:4:4
-
 
 
HDMI output 2
up to
4K@60 4:4:4
HDMI in 2
-
-
-