Audio Stream Settings; Enable/Disable The Audio Stream Source; Enable/Disable The Audio Stream Destination; Query The Name Of The Stream - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.12. Audio Stream Settings
Parameters
Parameter Description
<in> Audio stream source ID
<out> Audio destination ID
9.12.1. Enable/Disable the Audio Stream Source
Command and Response #streamenable
SET•/MEDIA/STREAMS/AUDIO/<in>/STREAM.Enabled=<logical_value>
ç
pw•/MEDIA/STREAMS/AUDIO/<in>/STREAM.Enabled=<logical_value>
æ
Parameters
Identifier Parameter description
The audio stream is
<logical_value>
unmuted or muted.
Example
ç SET /MEDIA/STREAMS/AUDIO/I101/STREAM.Enabled=true
æ pw /MEDIA/STREAMS/AUDIO/I101/STREAM.Enabled=true
9.12.2. Enable/Disable the Audio Stream Destination
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<out>/STREAM.Enabled=<logical_value>
ç
pw•/MEDIA/STREAMS/AUDIO/<out>/STREAM.Enabled=<logical_value>
æ
Parameters
Identifier Parameter description
The audio stream is
<logical_value>
unmuted or muted.
Example
ç SET /MEDIA/STREAMS/AUDIO/O101/STREAM.Enabled=true
æ pw /MEDIA/STREAMS/AUDIO/O101/STREAM.Enabled=true
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Formula
S<logical_devive_ID><stream_nr>
D<logical_device_ID><out_port_nr>
Value Explanation
true The audio stream is enabled (unmuted).
false The audio stream is disabled (muted).
Value Explanation
true The audio stream is enabled (unmuted).
false The audio stream is disabled (muted).
9.12.3. Query the Name of the Stream

INFO: The default name of the stream is the MAC address of the endpoint device and the stream number
separated by a dot. Example: A8:D2:36:F0:00:03.S1
Command and Response
ç GET•/MEDIA/STREAMS/AUDIO/<in>.SourceName
pw•/MEDIA/STREAMS/AUDIO/<in>.SourceName=<name>
æ
Example
ç GET /MEDIA/STREAMS/AUDIO/S2301.SourceName
æ pw /MEDIA/STREAMS/AUDIO/S2301.SourceName=Black_Sabbath-Heaven_and_Hell
9.12.4. Setting the Name of the Stream
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<in>.SourceName=<name>
ç
pw•/MEDIA/STREAMS/AUDIO/<in>.SourceName=<name>
æ
Example
ç SET /MEDIA/STREAMS/AUDIO/S102.SourceName=Celine_Dion-My_Heart_Will_Go_On
æ pw /MEDIA/STREAMS/AUDIO/S102.SourceName=Celine_Dion-My_Heart_Will_Go_On
9.12.5. Query the Name of the Destination
INFO:
The default name of the destination is the MAC address of the endpoint device and the port number
separated by a dot. Example: A8:D2:36:F0:00:03.D1
Command and Response
ç GET•/MEDIA/STREAMS/AUDIO/<out>.DestinationName
pw•/MEDIA/STREAMS/AUDIO/<out>.DestinationName=<name>
æ
Example
ç GET /MEDIA/STREAMS/AUDIO/D2301.DestinationName
æ pw /MEDIA/STREAMS/AUDIO/D2301.DestinationName=Audio_amplifier
9.12.6. Setting the Name of the Destination
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<out>.DestinationName=<name>
ç
pw•/MEDIA/STREAMS/AUDIO/<out>.DestinationName=<name>
æ
Example
ç SET /MEDIA/STREAMS/AUDIO/D102.DestinationName=My_small_black_speakers
æ pw /MEDIA/STREAMS/AUDIO/D102.DestinationName=My_small_black_speakers
133 133