Cable Wiring Guide; Cable Wiring Guide For Serial Data Transmission; Audio Cable Wiring Guide - Lightware UBEX Series User Manual

 
     
14. Appendix 14. Appendix
14.11. Cable Wiring Guide
14.11.1. Cable Wiring Guide for Serial Data Transmission
The F110 endpoint and the MMU are built with 3-pole Phoenix connector.
See below the two examples of the most common assembling cases.
UBEX and a DCE (Data Circuit- UBEX and a DTE (Data Terminal
terminating Equipment)
D-SUB 9 and Phoenix
14.11.2. Audio Cable Wiring Guide
Inputs and outputs of audio devices are symmetric or asymmetric.
The main advantage of the symmetric lines is the better protection
against the noise therefore, they are widely used in the professional
audio industry. Symmetric audio is most often referred to as balanced
audio, as opposed to asymmetric, which is referred to as unbalanced
audio. Lightware products are usually built with 5-pole Phoenix
connectors so we would like to help users assembling their own audio
cables. See the most common cases below.

ATTENTION! Symmetric and asymmetric lines can be linked with
passive accessories (e.g. special cables), but in this case half of
the line level is lost.
ATTENTION!
There are numerous types of regularly used connector
and cable types to connect audio devices. Please always make sure
that a connector or cable fits your system before use.

ATTENTION! Never join the phase-inverted (negative, cold or -)
poles (either right and left) to the ground or to each other on the
output side, as this can damage the unit.

INFO: Use a galvanic isolation in case of a ground loop.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
From Unbalanced Output to Balanced Input
2 x 6.3 (1/4") TS - Phoenix
Equipment)
D-SUB 9 and Phoenix
3.5 (1/8") TRS - Phoenix
From Balanced Output to Unbalanced Input
Phoenix - 2 x 6.3 (1/4") TS
Phoenix - 3.5 (1/8") TRS
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
2 x RCA - Phoenix
Phoenix - 2 x RCA
From Balanced Output to Balanced Input
Phoenix - 2 x 6.3 (1/4") TRS 2 x 6.3 TRS (1/4") - Phoenix
Phoenix - 2 x XLR 2 x XLR - Phoenix
Phoenix - Phoenix
For more information about the cable wiring see the Cable Wiring Guide
on our website https://lightware.com/support/guides-and-white-
papers.
196 196