Query The Status Of All Video Ports; Query The Number Of The Source Ports; Query The Number Of The Destination Ports; Video Stream Settings - Source (Input) Side - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.7.3. Query the Status of All Video Ports
The query returns with all information about the source streams and the destinations. The respond contains
the following information: #status
▪ Enable/disable status
▪ Signal presence
▪ Crosspoint status (which stream is connected to the destination port)
▪ Bandwidth information
▪ Source/destination names, tags
▪ Device tags
Resolution, refresh rate
▪
▪ HDCP information
▪ Locking status
Command and Response
ç GET•/MEDIA/XP/VIDEO/*.*
æ pr•/MEDIA/XP/VIDEO/*.*
9.7.4. Query the Number of the Source Ports
The query returns with the number of all source (input) ports including the disabled ones.
Command and Response
ç GET•/MEDIA/XP/VIDEO.SourcePortCount
pr•/MEDIA/XP/VIDEO.SourcePortCount=<number>
æ
Example
ç GET /MEDIA/XP/VIDEO.SourcePortCount
æ pr /MEDIA/XP/VIDEO.SourcePortCount=21
9.7.5. Query the Number of the Destination Ports
The query returns with the number of all destination (output) ports including the disabled ones.
Command and Response
ç GET•/MEDIA/XP/VIDEO.DestinationPortCount
pr•/MEDIA/XP/VIDEO.DestinationPortCount=<number>
æ
Example
ç GET /MEDIA/XP/VIDEO.DestinationPortCount
æ pr /MEDIA/XP/VIDEO.DestinationPortCount=23
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
9.8. Video Stream Settings - Source (Input) Side
Parameters
Parameter
<in>
9.8.1. Query the Name of the Stream
INFO:
The default name of the stream is the MAC address of the endpoint device and the stream number
separated by a dot. Example:
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in>.SourceName
pw•/MEDIA/STREAMS/VIDEO/<in>.SourceName=<name>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/S2301.SourceName
æ pw /MEDIA/STREAMS/VIDEO/S2301.SourceName=Casablanca
9.8.2. Setting the Name of the Stream
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>.SourceName=<name>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>.SourceName=<name>
æ
Example
ç SET /MEDIA/STREAMS/VIDEO/S102.SourceName=MyLittlePony_S01E01
æ pw /MEDIA/STREAMS/VIDEO/S102.SourceName=MyLittlePony_S01E01
9.8.3. Query the Tags of the Stream
The query returns with the tags which are added by the user.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in>.Tags
pr•/MEDIA/STREAMS/VIDEO/<in>.Tags=<tag>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/S102.Tags
æ pr /MEDIA/STREAMS/VIDEO/S102.Tags=4K60;movie;Die_Hard_2
#tag
Description
Input stream coming from the TX / TRX S<logical_devive_ID><stream_nr>
A8:D2:36:F0:00:03.S1
114 114
Formula