Lightware UBEX Series User Manual page 159

 
     
9. Programmer's Reference 9. Programmer's Reference
Change Command Injection Port Number
SET·/MEDIA/CONTROL/IR/<in|out>.ServerPort=<port_no>
ç
Enable/Disable Output Signal Modulation
SET·/MEDIA/CONTROL/IR/<out>/PORT.EnableModulation=<logical_value>
ç
Query the Tags of the Port
ç GET•/MEDIA/CONTROL/IR/<in|out>.Tags
Adding Tags to the Port
ç CALL•/MEDIA/CONTROL/IR/<in|out>:addTags(<tag>)
Deleting Tags of the Port
ç CALL•/MEDIA/CONTROL/IR/<in|out>:removeTags(<tag>)
Deleting All Tags of the Port
ç CALL•/MEDIA/CONTROL/IR/<in|out>:removeAllTags()
Query All Tags of the Device
ç GET•/MEDIA/CONTROL/IR/<in|out>.DeviceTags
Message Sending via Communication Ports
Sending a Text (ASCII-format) via Serial Port
ç CALL•/MEDIA/CONTROL/UART/<port>/PORT:sendText(<message>)
Sending a Binary Message (HEX-format) via Serial Port
ç CALL•/MEDIA/CONTROL/UART/<port>/PORT:sendBinaryMessage(<message>)
Sending a Message (ASCII-format) via Serial Port
ç CALL•/MEDIA/CONTROL/UART/<port>/PORT:sendMessage(<message>)
Sending Hex Codes in Little-endian Format via IR Port
ç CALL·/MEDIA/CONTROL/IR/<out>/PORT:sendProntoHex(<hex_code>)
Sending Hex Codes in Big-endian Format via IR Port
ç CALL·/MEDIA/CONTROL/IR/<out>/PORT:sendProntoHexBigEndian(<hex_code>)
Centralized Firmware Upgrade
Query the Status of Firmware Update
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateStatus
Query the Installed Firmware Package Version
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.PackageVersion
Launching the Firmware Update Procedure
ç CALL•/SYS/ENDPOINTS/<UBEX_EP>:startFirmwareUpdate()
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Cancellation of the Firmware Update Procedure
ç CALL•/SYS/ENDPOINTS:cancelFirmwareUpdate(<UBEX_EP>)
Restarting the Firmware Update Procedure
ç CALL•/SYS/ENDPOINTS:restartFirmwareUpdate(<UBEX_EP>)
Query the Firmware Update Progress
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateProgress
Query the Last Message of the Firmware Update
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateLastMessage
Allowing Unsupported Firmware Packages
SET•/SYS/ENDPOINTS/<UBEX_EP>.AllowUnsupportedFirmware=<logical_value>
ç
159 159