Rack Shelf Mounting - Mmu - Lightware UBEX Series User Manual

 
     
3. Installation 3. Installation
Step 4. As a final step, mount the unit in the rack.
Standard rack installation
ATTENTION!
Always use all the four screws for fixing the rack ears
to the rack rail. Choose properly sized screws for mounting. Keep
minimum two thread left after the nut screw.
Mounting the rack ears to the rack rail
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
3.3. Rack Shelf Mounting - MMU
Two rack ears are supplied with the product, which are fixed on left
and right side with 2x 4 pcs M4 screws. The default position allows
mounting the device as a standard rack unit installation.

WARNING! M4x8 size is the longest allowed screw for fixing the
ears to the housing. Using different (e.g. longer) ones may cause
damage to the device.

WARNING! Pay attention to the ventilation holes when designing
the system. Front and rear ventilation holes must not be covered.
INFO:
The screws for the rack frame are not supplied to the device.
INFO:
The device is rack sized and 1U high.
26 26