Rear View - Lightware UBEX Series User Manual

 
     
2. Product Overview 2. Product Overview
2.2.2. Rear View
UBEX-PRO20-HDMI-R100 2xMM-QUAD and 2xSM-QUAD
6 7 8
UBEX-PRO20-HDMI-R100 2xSM-BiDi-DUO
6 7 8
UBEX-PRO20-HDMI-R100 2xMM-2xDUO and 2xSM-2xDUO
6 7 8
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
6
9 q
7
9 w
8
9
9
q
e
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Neutrik Neutrik powerCON TRUE1 NAC3MPX-
powerCON AC WOT connector accepting 100-240 V, 50 or
connector 60 Hz. See more details about it in the
Power Connection section.
Neutrik Neutrik etherCON NE8FDV-YK locking
etherCON RJ45 connectors for 1 Gbps Ethernet
Ethernet connections to control the device, for user
connectors Ethernet access, and firmware upgrade
purpose. See the details about the cable
wiring in the Ethernet Connectors
and the concept of the operation in the
Ethernet Interface section.
HDMI input HDMI input ports with HDMI 2.0 support
ports with for the source devices (only for transmitter
flange and transceiver operation modes). See
more details about the HDMI interface in
the Video Interface section.
HDMI output HDMI output ports with HDMI 2.0 support
ports with for sink devices. When the device is
flange configured as a transmitter or transceiver,
the ports operate as local HDMI outputs.
See more details about the HDMI interface
in the Video Interface section.
Neutrik Neutrik opticalCON QUAD NO4FDW-A
opticalCON singlemode or multimode fiber optical
QUAD optical connector for AV signal transmission.
connector
▪ supports
2xMM-QUAD:
cable connection.
2xSM-QUAD: supports singlemode
▪
cable connection.
See more details about it in the
opticalCON Connectors section.
w Neutrik
opticalCON
AC DUO BiDi
optical
connector
e Neutrik
section
opticalCON
DUO optical
connector
See more details about the fiber optical connectors in the
opticalCON Connectors
possibilities / connector pin layouts in the
Switch and R-series Endpoints
multimode
Neutrik
20 20
Neutrik opticalCON DUO NO2-4FDW-A
singlemode fiber optical connector with
BiDi support for AV signal transmission.
See more details about it in the Neutrik
opticalCON Connectors section.
The connector does not support the
Neutrik opticalCON cross cables. Please
use standard cable only.
2x Neutrik opticalCON DUO NO2-4FDW-A
singlemode or multimode fiber optical
connectors for AV signal transmission.
▪ 2xMM-2xDUO: supports multimode
cable connection.
▪ 2xSM-2xDUO: supports singlemode
cable connection.
See more details about it in the Neutrik
opticalCON Connectors section.
Neutrik
section and about the connection
Connection between the
section.