Rear View - Lightware UBEX Series User Manual

 
     
2. Product Overview 2. Product Overview
2.1.2. Rear View
UBEX-PRO20-HDMI-F100
5 6 7
UBEX-PRO20-HDMI-F110
q w
5 6 7
AC connector Standard IEC
5
100-240 V, 50 or 60 Hz. See more details
about it in the
section.
Ethernet Standard locking RJ45 connectors for
6
connectors 1 Gbps Ethernet connections to control
the device, for user Ethernet access, and
firmware upgrade purpose. See the details
about the cable wiring in the
Connectors section and the concept of the
operation in the
HDMI input HDMI input ports with HDMI 2.0 support
7
ports for the source devices (only for transmitter
and transceiver operation modes). See
more details about the HDMI interface in
the Video Interface
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
8
8 9
9
q
e r
8 9
w
connector accepting
AC Power Connection
e
Ethernet
Ethernet Interface section.
section.
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
HDMI output HDMI output ports with HDMI 2.0 support
ports for sink devices. When the device is
configured as a transmitter or transceiver,
the ports operate as local HDMI outputs.
See more details about the HDMI interface
in the Video Interface section.
SFP+ port Optical port slots for 2x 10 GbE SFP+
slots modules or 2x 10 GbE DAC cables. Ports
can be used for either singlemode or
multimode fiber optical connections. See
more details about the SFP+ interface in
the SFP / SFP+ Interfaces section.
Audio input 5-pole Phoenix connector for balanced
port analog audio input. The port is available
in all operation modes (TX/RX/TRX). See
more details about the pin assignment
in the Symmetrical Analog Stereo Audio
Connector section, about the cable wiring
in the Audio Cable Wiring Guide
and about the analog audio interface in the
Audio Interface section.
Audio output 5-pole Phoenix connector for balanced
port analog audio output. The port is available
in all operation modes (TX/RX/TRX). See
more details about the pin assignment
in the Symmetrical Analog Stereo Audio
Connector section, about the cable wiring
in the Audio Cable Wiring Guide
and about the analog audio interface in the
Audio Interface section.
Infrared 3-pole TRS connector, also known as 3.5
connectors mm (1/8") jack plug for optional IR detector
(IR IN) and emitter (IR OUT) connection.
See more details about the pin assignment
in the IR Connector section, and about the
concept of the operation in the
Interface section.
RS-232 3-pole
r
connector communication. See more details about
the pin assignment in the
section, about the cable wiring in the
Wiring Guide for Serial Data Transmission
section, and the concept of the operation in
the
section,
section,
Infrared
18 18
Phoenix connector for serial
RS-232 Connector
Cable
Serial Interface section.