Lightware UBEX Series User Manual page 87

 
     
8. Lightware Device Controller 8. Lightware Device Controller
Source Stream Panel
Clicking on the source stream panel opens the properties of the stream. The most important signal
information and settings are available from the panel.
Endpoint tab of the Device properties window - Transceiver - Source stream properties
Settings
▪
Stream naming;
▪ Enabled: when it is checked in, the stream is enabled; if it is not, the stream is muted.
▪ Tile icon: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
▪ Identify Stream / Identify Display.
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the Search Field.
#streamenable #tag
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
#identifystream #identifydisplay
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Frame Rate Converter Settins
▪
Output resolution mode:
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
▪ Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the
section.
▪ Color space conversion (No conversion / RGB / YUV 4:4:4 / YUV 4:2:2);
▪ No Sync Screen (Test
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪ Frame Detector
port before a possible rescaling / frame rate conversion.
SFP+ Link Panels
Clicking on the SFP+ Link 1 or 2 panel opens the properties of the SFP+ connections. The most important
signal information and the parameters of the SFP are available from the panel.
Link Aggregation Status Indicator
Icon
SFP+ connection is established successfully and the link aggregation is working
successfully.
No connection is established between the SFP+ links.

INFO: You can find possible causes and solution suggestions in the
of no connection or link aggregation problems.
#frc
Pattern). #testpattern #nosyncscreen
- The tool displays the frame information of the original stream coming from the input
Description
Troubleshooting
87 87
Resolutions of the Scaler / FRC
#csc #colorspace
#sfp
chapter in the case