Lightware UBEX Series User Manual page 49

 
     
4. UBEX Concept 4. UBEX Concept
Crosspoint Possibilities
The following table shows the available crosspoint possibilities:
Crosspoint possibilities of the video
streams for the UBEX matrix
Laptop 1/02 Stream #1
Laptop 2/02 Stream #2
Laptop 3/01 Stream #3
Laptop 3/02 Stream #4
Summary: The video streams of the transmitters can be selected to all sink devices. The video stream of a
transceiver is not selectable to the output of the same transceiver.
Stream Identifying Tools
User can add a unique name and additionally tags
can be attached to the stream. In this way the
streams become searchable easily.
The following settings help the user to handle the
streams in a bigger matrix:
▪ Stream name: a unique name given by the user,
like "The Mill";
▪ Tags: more tags can be attached to the
stream to help identifying it. You can search
for words and LDC shows the hits.
– The first three outlined tags are fixed:
the stream name, MAC address, and the
logical device ID; these ones cannot be
removed from the tags.
– The following tags are freely configurable
by the user. The following characters
are allowed when naming: Letters (A-Z)
and (a-z), numbers (0-9), and any special
characters, except semicolon ( ; ).
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
Destinations
TRX #1 TRX #2 RX
1/01 2/01 4/01
4K TV 4K TV 4K TV Monitor
   
-
   
-
     
     
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Stream Search
Use the Search field to find any stream on the network.
You can search in the Sources, in the Destinations,
or Both. Start typing in the field the LDC lists the hits
and narrows it during the typing. See the details in
the Search Field section.
4/02
Scaling Options
If a 4K60 stream is switched to a HD monitor, it cannot display the high-resolution video. The solution is to
scale the stream to lower resolution which can be supported by the sink device. Two options are available:
 
▪ The stream is re-scaled on the source (TX) side - in this case the stream is transmitted with HD
resolution to the receiver, additionally you can optimize the network bandwidth usage as well.
 
▪ The stream is re-scaled on the destination (RX or TRX) side - the original 4K60 signal is transmitted to
the receiver and it is re-scaled on the output port.
 
Device Map
 
The default order of the endpoint devices can be reconfigured easily
using drag & drop method with the Device map tool.
The intelligent search tool in the device map makes possible to find
the desired endpoint device and handle a bigger matrix effectively.
The current operation mode (transmitter, receiver, or transceiver)
can be also changed in the Device map.
See the details about the tool in the Device Map section.
49 49