Front And Rear View - R-Series Endpoint Devices; Front View - Lightware UBEX Series User Manual

 
     
2. Product Overview 2. Product Overview
2.2. Front and Rear View - R-series Endpoint Devices
2.2.1. Front View
All Models
1
1 Mounting ears Durable mounting ears on both sides of the device for the easy mounting in the
case of rental or staging application. The ears serve more purposes, see the
details in the
2 Status LEDs The LEDs give immediate feedback about the current status of the endpoint
device. See the details about the operation of the LEDs in the
(on the right side).
LCD screen LCD screen showing the most important settings and parameters in the front panel
3
menu. The available settings and information depends on the current application
mode. See the details in the
Jog dial Easy setting and menu navigation by the jog dial control. Keep dialing and click
4
control knob while getting feedback on the LCD.
5 Reset button Reboots the device (the same as disconnecting from the power source and
reconnecting again).
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
2 3 4 5
Mounting Options - R-series Endpoint Devices section.
Status LEDs
Front Panel LCD Menu Operation - Endpoints
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Status LEDs
LIVE
blinking The device is powered and ready to use.
off
1
STATUS
on
blinking Measured temperature or voltage value is out of the limits.
off
LINK OK
on
section
blinking
off
chapter.
MMU AVAILABLE
on
blinking Matrix mode is active; no communication between the endpoint and the MMU.
off
The device is not powered or out of operation.
All measured temperature and voltage values are within the limits.
The device is not powered or out of operation.
The connection is established on the fiber optical links and the Link Aggregation is
working.
The connection is established on the fiber optical links and LACP detection period is
active.
No connection is established on one of the fiber optical links.
Matrix mode is active; the communication is live between the endpoint and the Matrix
Management Unit (MMU).
Extender mode is active; no communication between the endpoint and the MMU.
19 19
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver