Setting The Background Color Of The Video Wall; Timing Mode Setting; Color Space Converter Setting; Resolution Mode Setting - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.10.11. Setting the Background Color of the Video Wall
The video wall background generates an whole-colored image which can be displayed when there is no
incoming signal on the video wall or the display devices are not attached to a zone yet. The following method
sets the displayed color defined in RGB code.
Command and Response
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.BackgroundColor=<RGB_code>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.BackgroundColor=<RGB_code>
æ
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.BackgroundColor=128;128;128
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.BackgroundColor=128;128;128
9.10.12. Timing Mode Setting
The timing mode is set with the following command. See more details about it in the
Command and Response #timingmode #freerun #sourcelocked
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.TimingMode=<timing_mode>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGSTimingMode=<timing_mode>
æ
Parameters
The <timing_mode> can be set to Freerun or SourceLocked.
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.TimingMode=SourceLocked
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.TimingMode=SourceLocked
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
9.10.13. Color Space Converter Setting
Command and Response
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ColorSpaceSetting=<color_space>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ColorSpaceSetting=<color_space>
æ
Parameters
<color_space>
Timing Modes section.
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ColorSpaceSetting=RGB
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ColorSpaceSetting=RGB
9.10.14. Resolution Mode Setting
Command and Response
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ResolutionMode=<resolution_mode>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ResolutionMode=<resolution_mode>
æ
Parameters
<resolution_mode>
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ResolutionMode=EdidBased
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ResolutionMode=EdidBased
#csc #colorspace
Identifier Parameter description Value
Pass
Color space setting
RGB
YCbCr 4:4:4
YCbCr 4:2:2
#scaler
Identifier Parameter description Value
Pass
Resolution mode Forced
setting
EdidBased
124 124
Explanation
Pass-through mode - the original color
space of the stream is transmitted to the
sink device.
Forced RGB color space.
Forced YCbCr 4:4:4 color space.
Forced YCbCr 4:2:2 color space.
Explanation
Pass-through mode - the original stream is
transmitted to the sink device.
The endpoint device forces the resolution
set in the ResolutionSetting for the stream
and transmits it to the sink device.
The endpoint device forces the resolution
which is read out from the EDID of the
connected sink device.