Receiver Mode - Lightware UBEX Series User Manual

Matrix application mode, av over ip multimedia extender
Table of Contents

Advertisement

 
 
8. Lightware Device Controller
8. Lightware Device Controller
8.11.2. Receiver Mode
Stream Properties Panels
Clicking on the Stream 1 or Stream 2 panels opens the properties of the video streams. The most important
signal information and settings are available from the panel.
Endpoint tab of the Device properties window - Receiver - Stream Properties
Settings
Stream naming;
Enabled: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
Stream source: information about the currently connected stream and the ID of the source device.
Disconnect stream: clicking on the button results the source stream is disconnected from the output
port.
Tile icon: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the
Search
Field.
#streamenable #tag
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual
UBEX series – Matrix Application Mode – User's Manual
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
Frame Detector
rescaling / frame rate conversion.
HDMI Output Ports
Clicking on the HDMI out 1 or 2 panels opens the properties of the output ports. The most important signal
information and settings are available from the panel.
Endpoint tab of the Device properties window - Receiver - Output port properties
- The tool displays the frame information of the transmitted stream after a possible
82
82

Advertisement

Table of Contents
loading

Table of Contents