Resetting The Emulated Edids; System Monitoring Commands; Query Connected Device Presence; Query Video Signal Presence On A Port - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.14.7. Resetting the Emulated EDIDs
Command and Response
ç CALL•/MEDIA/EDID:reset()
æ mO•/MEDIA/EDID:reset=
Example
ç CALL /MEDIA/EDID:reset()
æ mO /MEDIA/EDID:reset=
Calling this method switches all emulated EDIDs to factory default one. See the table in the
List section.
9.15. System Monitoring Commands
Parameters #systemmonitor
Parameter Description
<in> Input stream coming from the TX / TRX
<out> Output port of the RX / TRX
9.15.1. Query Connected Device Presence
Connected property indicates that cable or device is connected to the input or output port.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.Connected
pr•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.Connected=<parameter>
æ
Parameters
Identifier Parameter description
Connected device or
<parameter>
cable indicator
Example
ç GET /MEDIA/STREAMS/VIDEO/S101/PORT.Connected
æ pr /MEDIA/STREAMS/VIDEO/S101/PORT.Connected=1
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Factory EDID
Formula
S<logical_devive_ID><stream_nr>
D<logical_device_ID><out_port_nr>
Value Explanation
0 Not present
1 Present
F Unknown
9.15.2. Query Video Signal Presence on a Port
SignalPresent property indicates valid signal present on the port.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.SignalPresent
pr•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.SignalPresent=<parameter>
æ
Parameters
Identifier Parameter description
Signal present
<parameter>
indicator
Example
ç GET /MEDIA/STREAMS/VIDEO/D101/PORT.SignalPresent
æ pr /MEDIA/STREAMS/VIDEO/D101/PORT.SignalPresent=1
9.15.3. Query Video Signal Presence in a Stream
SignalPresent property indicates valid signal present in the stream.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalPresent
pr•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalPresent=<parameter>
æ
Parameters
Identifier Parameter description
Signal present
<parameter>
indicator
Example
ç GET /MEDIA/STREAMS/VIDEO/D101/STREAM.SignalPresent
æ pr /MEDIA/STREAMS/VIDEO/D101/STREAM.SignalPresent=1
Value Explanation
0 Not present
1 Present
F Unknown
Value Explanation
0 Not present
1 Present
F Unknown
137 137