Lightware UBEX Series User Manual page 157

 
     
9. Programmer's Reference 9. Programmer's Reference
EDID Management
Query the Validity of a Dynamic EDID
ç GET•/MEDIA/EDID/D/<dynamic>.Validity
Query the Preferred Resolution of an EDID
ç GET•/MEDIA/EDID/U|F|D|E/<user|factory|dynamic|emulated>.PreferredResolution
Emulating an EDID on an Input Port
ç CALL•/MEDIA/EDID:switch(<user|factory|dynamic>:<emulated>)
Emulating an EDID on All Input Ports
ç CALL•/MEDIA/EDID:switchAll(<user|factory|dynamic>)
Copy an EDID to User Memory
ç CALL•/MEDIA/EDID:copy(<user|factory|dynamic|emulated>:<user>)
Deleting an EDID from User Memory
ç CALL•/MEDIA/EDID:delete(<user>)
Resetting the Emulated EDIDs
ç CALL•/MEDIA/EDID:reset()
System Monitoring Commands
Query Connected Device Presence
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.Connected
Query Video Signal Presence on a Port
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.SignalPresent
Query Video Signal Presence in a Stream
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalPresent
Query Embedded Audio Presence
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.EmbeddedAudioPresent
Query the Signal Type
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalType
Query the Original Resolution of the Stream Source
ç GET•/MEDIA/STREAMS/VIDEO/<in>/PORT.Resolution
Query the Modified Resolution of the Stream Source
ç GET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.Resolution
Query the Original Resolution of the Stream Destination
ç GET•/MEDIA/STREAMS/VIDEO/<out>/STREAM.Resolution
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Query the Modified Resolution of the Stream Destination
ç GET•/MEDIA/STREAMS/VIDEO/<out>/PORT.Resolution
Query the Bandwidth of the Stream
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.Bandwidth
Query the Control Module of the Stream Destination
ç GET•/MEDIA/XP/VIDEO/<out>/.OwnedBy
Query the Bandwidth Limitation Indicator
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.BandwidthLimitExceeded
Query the Status of the Analog Audio Output
ç GET•/MEDIA/STREAMS/AUDIO/<out>/Port.MuteStatus
Network Configuration - MMU
Query the DHCP State
ç GET•/MANAGEMENT/NETWORK.DhcpEnabled
Change the DHCP State
SET•/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
ç
Query the IP Address
ç GET•/MANAGEMENT/NETWORK.IpAddress
Change the IP Address (Static)
SET•/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
ç
Query the Subnet Mask
ç GET•/MANAGEMENT/NETWORK.NetworkMask
Change the Subnet Mask (Static)
SET•/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
ç
Query the Gateway Address
ç GET•/MANAGEMENT/NETWORK.GatewayAddress
Change the Gateway Address (Static)
SET•/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
ç
Apply Network Settings
ç CALL•/MANAGEMENT/NETWORK:ApplySettings()
157 157