Video Wall; Description; Layouts And Zones - Lightware UBEX Series User Manual

 
     
4. UBEX Concept 4. UBEX Concept
4.4. Video Wall
4.4.1. Description
The UBEX matrix has built-in video wall feature which can be configured countless ways. The main properties
of the video wall:
▪ Handles up to 8x4 (column x row) display devices;
▪ More different layouts for the same video wall;
▪ Zones within the video wall;
▪ Works in receiver and transceiver operation modes as well;
▪ Interactive GUI in the LDC software for the easier handling;
▪ Editable with LW3 protocol commands;
▪ Only the HDMI out 1 port can take part in the video wall, the HDMI out 2 does not participate but can
transmit any other stream during the operation of the video wall.
Installation example for the video wall
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
4.4.2. Layouts and Zones
More different layouts can be defined within a video wall installation. The layouts contain one or more zones
where different sized video walls can be displayed. The different zones can display different source streams.
You can find a detailed tutorial how to create video walls, layouts, and define zones in the
section.
The following figures show some examples for the usage of the layouts and the zones. The size of the video
wall is always 4x4 in our example.
The Default Layout
When a video wall is created, the default layout contains one zone only (Zone 0) which includes all displays
in the video wall showing one stream.
Layout with Four Zones
The next layout example contains four zones which displays four different source streams. Each zones have
four display devices.
50 50
Video Wall Setup