Lightware UBEX Series User Manual page 86

 
     
8. Lightware Device Controller 8. Lightware Device Controller
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪ Frame Detector - The tool displays the frame information of the transmitted stream after a possible
rescaling / frame rate conversion.
HDMI In 2 Panel
Clicking on the HDMI in 2 panel opens the properties of the input port. The most important signal information
and settings are available from the panel.
Endpoint tab of the Device properties window - Transceiver - Input port properties
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
Available Settings and Tools
▪ HDCP setting (Enable / Disable);
Frame Detector
▪
port before a possible rescaling / frame rate conversion.
HDMI Output Port

INFO: The properties panel belongs to the local HDMI output of the transceiver.
Clicking on the HDMI output 2 port icon results in opens the Port properties. The most important signal and
display information and settings are available from the panel.
Endpoint tab of the Device properties window - Transceiver - Local output port properties
Available Settings and Tools
▪ HDCP mode (Auto / Always);
▪ Power 5V mode (Auto / Always on / Always off);
▪ Frame Detector
port before a possible rescaling / frame rate conversion.
#hdcp
- The tool displays the frame information of the original stream coming from the input
#hdcp
#power5v
- The tool displays the frame information of the original stream coming from the input
86 86