Known Issues - Lightware UBEX Series User Manual

Matrix application mode, av over ip multimedia extender
Table of Contents

Advertisement

 
 
14. Appendix
14. Appendix
v1.2.0b9
Release date: 2019-11-27
Bugfix:
▪ Added the built-in Endpoint firmware version (v1.4.0) for the
Centralized Firmware Update.
▪ Fixed some issues (backup, settings storing, status messages,
MDNS support) and improved the stability.
▪ The Centralized Firmware update function is fixed. This feature
is working from the installed MMU firmware v1.1.0 and Endpoint
firmware v1.3.1 and available for the later firmware package
versions.
▪ IP settings limitation is fixed. The 10.0.0.0/8 IP range is fully
supported in the MMU IP settings.
▪ After upgrading the MMU cannot be downgraded to versions
prior to v1.2.0.
▪ Fixed some UI bugs and performance issues. Fixed Tile view.
Endpoint (v1.4.0b4)
New feature:
▪ Added check to refuse downgrading to earlier versions
Bugfix:
▪ Added file system in order to cope with bad NAND flash blocks
▪ Improved stability for multicast update
v1.1.1b8
Release date: 2019-07-03
New feature:
▪ Added Identify stream function.
▪ Added filter and sort feature to the Upgrade Firmwares tab.
▪ v1.3.2 endpoint firmware supported by MMU.
Bugfix:
▪ Update process improved and fixed issues.
▪ Fixed minor GUI bugs.
Endpoint (v1.3.2b2)
New feature:
▪ Fixed issues with using the 10.0.0.0/8 IP range for control
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual
UBEX series – Matrix Application Mode – User's Manual
v1.1.0b10
Release date: 2019-07-02
New feature:
▪ Grid Video Wall is implemented.
▪ Centralized System Update is available - The Firmware update of
the Endpoints are managed by the MMU.
▪ Adding support of Rental Endpoints.
▪ Command injection to IR endpoint ports is available.
Bugfix:
▪ Adding missing 4K EDIDs (F146 - F148) to the Factory EDID list.
▪ Fixing RemoteIP problem by implementing periodic membership
report to multicast groups.
▪ Fixing crash caused by TcpTunnel in debug mode.
v1.0.6b10
Release date: 2019-05-03
New feature:
▪ Supports UBEX-PRO20G-HDMI-F110 endpoints (Analog audio
input and output, RS-232)
▪ Supports TRX2 mode for UBEX-PRO20G-HDMI-F100 and UBEX-
PRO20G-HDMI-F110 endpoints
▪ Video and Audio cross-point Tile View
▪ Redesigned device properties
▪ Supports configuration and tagging of RS-232 and Ethernet
endpoint ports
▪ Command injection to RS-232 endpoint ports is available
▪ NTP client is available
Bugfix:
▪ General improvements on stabiliy
v1.0.4b1
Release date: 2018-11-20
Bugfix:
▪ Fixed configuration loss during backup-restore and firmware
upgrade. This issue was only present in package version 1.0.3b1.
Please be sure to store a backup of your configuration before
upgrading from v1.0.3b1 to v1.0.4b1. Upgrades from other
versions are not affected.
v1.0.3b1
Release date: 2018-11-09
Bugfix:
▪ Fixed a bug that caused the MMU not being able to reload the
configurations for the endpoints with 918200## part number
after the reset of the MMU.
v1.0.2b1
Release date: 2018-09-25
Bugfix:
▪ LCD re-initialization issue is fixed.
v1.0.1b5
Release date: 2018-09-25
New feature:
▪ Basic LCD menu is available to set Network settings and reset
the Ubex MMU to factory defaults.
▪ System log viewer is available in the built-in web control software.
▪ The MMU built-in web control software is available.
v1.0.0b6
Release date: 2018-07-05
14.5.3. Known Issues
The firmware package of the UBEX endpoint devices contains a few
known issues and limitations which are going to be fixed in the next
firmware release.
Endpoint Firmware Package v1.4.1
12-bit deep color HDMI signals cannot be transmitted, black
image is displayed on the sink device
4:2:0 sampling is supported on the input and output ports in
pass-through mode only
The configuration restore procedure works on the same type of
operation modes only
HBR audio formats (Dolby TrueHD; DTS-HD Master Audio 7.1)
are not supported
Video output is unstable when scaling a pre-cropped image to
4K@60.
189
189

Advertisement

Table of Contents
loading

Table of Contents