Mmu Settings; Status Tab; Network Tab - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
8.16. MMU Settings
8.16.1. Status Tab
Status tab in the MMU settings menu
The most important hardware and software related information can be found on this tab: hardware and
firmware version, serial numbers, endpoint statistics, temperatures, operation time, and voltage information.
Device label can be changed to unique description.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
#status #firmwareversion #label #devicelabel
8.16.2. Network Tab
Network tab in MMU settings menu
Static IP address and DHCP (dynamic IP address) settings can be set on this tab. Always press the Apply
settings button to save changes.
Factory defaults settings of the MMU can be recalled with a dedicated button. See the factory default values
in the UBEX-MMU-X200 section. #network #dhcp #ipaddress
95 95