Mounting Options - R-Series Endpoint Devices; Truss Mounting; Standard Rack Installation - Lightware UBEX Series User Manual

 
     
3. Installation 3. Installation
3.2. Mounting Options - R-series Endpoint Devices
UBEX R-series endpoint devices can be mounted in several ways,
depending on the application. They can be mounted into the rack in
pairs, or can be used standalone. Rack ears also serve easy handling
and bump protection, mounting threads on top and one of the sides to
conform strict installation safety regulations.

ATTENTION! To ensure the correct ventilation and avoid overheating
let enough free space in front and rear of the appliance and keep
the ventilation holes free.
3.2.1. Truss Mounting
Mounting thread on top and on one of the sides for safe and secure
installation. Rigging the handles with a safety wire rope is highly
recommended for safety reasons.
To order mounting accessories please contact sales@lightware.com.
(Truss clamp and safety wire rope are not available at sales.)
Truss mounting for R-series endpoint devices
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
3.2.2. Standard Rack Installation
Rack mounting kit includes all necessary accessories for standard
rack installation:
▪ 2 pcs rack ears,
▪ 12 pcs. black, M4x8mm hexagon socket countersunk head
screws.
Rack mounting kit is not supplied with the product, it can be purchased
separately, please contact sales@lightware.com.
Step 1. Take two devices directly each other.
Step 2. Two mounting holes on the front ears and two on the back of
the chassis is for fastening the two units to each other with
2x 2 pcs M4x8 mm screws. This way you get a one-rack wide
and 1U high device.
Front View
Rear View

ATTENTION! Take care of the mounting direction of the screws!
Mounting direction of the screws
Step 3. Take the rack ears on the left and right side of the extender pair
as shown in the picture. Insert the screws into the holes and fix
the front ears to the devices.
Assembly of the mounting ears
25 25